SiriusXM XDNX1V1 Betriebsanweisung PDF herunterladen (Seite 32)

3 Route the cable through the main cabin area under the interior trim,

towards the front of the vehicle. Use a blunt plastic putty knife or

similar blunt tool to lift the plastic trim just enough to tuck the cable

under underneath. Avoid side airbag locations on back pillars and

above the doors. Airbag locations are marked with “SRS” logos. Be

careful not to crimp or cut the cable.

4 Bring the cable out from the trim near the front of the cabin and

route it under the carpet toward the dashboard or console. Coil any

excess cable in a hidden location, such as under the carpet, keeping

it away from any vehicle pedals or controls. Secure the excess cable

with wire ties (purchased separately).

5 Bring the end of the cable out at the PowerConnect Vehicle Dock

location. Leave yourself enough cable so you can easily connect it to

the antenna connector of the dock.

6 Continue with “Step 5: Connect the Magnetic Mount Antenna and

PowerConnect Power Adapter” on page 34.

Pickup Truck

1 Use a blunt plastic putty knife or similar

blunt tool to lift the rubber molding

around the windshield and tuck the

antenna cable underneath it.

2 Continue tucking the cable underneath

the windshield molding around the

windshield to the lowest corner.

3 At the lowest corner of the windshield,

route the cable out of the windshield

Vehicle Installation

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 93 94

Keine Kommentare

SiriusXM XDNX1V1 Betriebsanweisung Seite 32